Objet’s applications solutions enable manufacturers and industrial designers to reduce cost of product development cycles and dramatically shorten time-to-market of new products.

SolidWorks

File > Save As Set Save As Type to STL Options > Fine > OK Save STL settings: How to change STL settings File > Save As STL > Options For a smoother STL file, change the Resolution to Custom Change the deviation to 0.0005in (0.004 mm) Change the angle to 5 (Smaller deviations and angles will produce a smoother file, but the file size will get larger)

Pro/ENGINEER

File > Export > Model STL Set chord height to 0. The field will be replaced by minimum acceptable value. Set Angle Control to 1 OK

Catia

Select STL command Maximum Seg to 0.015mm Select the model and > select Yes Select Export > type File name > OK

IronCAD

Richt Click on the part Part properties > Rendering Set Facet Surface smoothing to 150 File > Export Choose .STL

McNeel Rhino

File > Save As Select File Type to STL Select File Name > Save Select Binary Select Detail Controls from Mesh Options Max Angle = 20, Max aspect ration = 6, Min edge Length = 0.0001 OK

UGS NX

File > Export > Rapid Prototyping Output type : Binary Triangle & Adjacency Tolerance: 0.015 mm Set Auto normal Gen to ON Set Normal Display to ON Set Triangle Display to ON File Header Information: Press OK In case a error messages "Negative coordinates found" appears, it can be ignored

Solid Edge

Open Model & select File > Save As Select File type as STL Options > conversion tolerance to 0.015 mm Surface Plane Angle > 45° Select Binary type and OK Name & Save STL file

AutoDesk Inventor

Go to the File menu, then select the ‘Save Copy As’ option Select STL from the Types drop-down Click the Options button, and choose the High detail level Click the Save Button